|
|
|
|
|
 |
|
 |
| How to use the dial rule? |
|
JR-X provide flexible dial rule, with different dial-rule configure, user can easily implement the following function:
----Replace, delete or add prefix of the dial number.
----Make direct IP to IP call
----Place the call to different servers according the prefix.
You can click "Add" to add a new dial rule. Below is the detail setting of the dial-rule:
Phone Number: The Number suit for this dial rule, you can the number as full match or prefix match. Full match means that if the number use dials is the completely same as this number, the call will use this dial-rule. Prefix match means that if prefix of the number that the user dials is the same as the prefix, the call will use this dial-rule, to distinguish from the full match case, you need to add "T" after the prefix number in the phone number setting.
Call Mode: support SIP..
Destination (optional): call destination, can be IP or domain. Default is 0.0.0.0, in this case the call will be routed to the Public SIP server. If you set the destination to 255.255.255.255, then the call will be routed to the private SIP server. Also you can key other address here to make direct IP calls
Port (optional): Configure the port of the destination, default is 5060 in SIP and 1720 for H323
Alias (optional):Set up the Alias. We support four Alias as below. Alias need to co-work with the Del Length:
add:xxx, add prefix to the phone number, can set to reduce the dial length.
all: xxx, replace the phone number with the xxx, can use as speed dial function.
del, delete the first N numbers. N is set in the Del Length
rep:xxx,replace the first N numbers. N is set in the Del Length. For Example: Use wants to place a call 8610-62281493, then you can set the phone number in the dial rule as 010T, and set the Alias as rep:8610, and set the Del Length to 3. Then all calls begin with 010 will be changed to 8610 xxxxxxxx.
Suffix (optional):Configure suffix, show no suffix if not set
Instance:
2T rule: If the call starts with 2, the first 2 will be deleted, and the rest number will be sent to private SIP server.
3T rule: If the call starts with 3, the first 3 will be deleted, and the rest number with be sent to public SIP server.
123 rule: Dial 123 and will send 8675583018049 to your server. Used as speed dial function.
0T rule: If the calls is begin with 0, the first 0 will be replace by 86. Means that if you dial 075583018049 and JR-X will send 8675583018049 to your server.
179 rule: when you dial 179 , the call with send to 192.168.1.179, suit for LAN application without set up a sip server. |
|
| |
|
|
